Skip to content
  • There are no suggestions because the search field is empty.

How do I set up reverse DNS for hostname resolution?

This article explains how to make sure your assets are shown with the correct hostnames after a network scan. 

How hostnames are resolved

During a network scan, the Scanner Appliance performs a reverse DNS lookup (PTR lookup) for each IP address. The hostname returned by your DNS server is used as the asset's hostname in Security Center. If no PTR record is found, the asset is shown with its IP address only.

See where a hostname came from
In the scan results, the finding
Hostname Determination Reporting (HID-2-1-332906) shows each hostname found and its source.

Prepare your DNS

  1. Make sure a reverse lookup zone exists for each IP range you scan.
  2. Make sure each host has a correct PTR record.
  3. If you use DHCP, make sure PTR records are updated when IP addresses change.

.local domains are not supported
Hosts in domains that end in ".local" cannot be resolved and are shown with their IP address only.


Multiple DNS servers
Separate each DNS server with a space, e.g., "10.0.0.10 10.0.0.11".

Use Windows hostnames instead of DNS

If your DNS records are often outdated, add one of these optional plugins to your scan configuration to use the Windows hostname instead:

  • Register NetBIOS Desktop Name as Hostname (Custom) (HID-2-1-5311451)
  • Register ComputerName as Hostname (Custom) (HID-2-1-5311452)